Bimmergroup International
Bimmergroup Belgium
Bimmergroup Deutschland
Bimmergroup Eesti
Bimmergroup España
Bimmergroup France
Bimmergroup Hrvatska
Bimmergroup Ireland
Bimmergroup Italia
Bimmergroup Latvija
Bimmergroup Lëtzebuerg
Bimmergroup Lietuva
Bimmergroup Malta
Bimmergroup Nederland
Bimmergroup Österreich
Bimmergroup Portugal
Bimmergroup Slovenija
Bimmergroup Slovensko
Bimmergroup Suomi
Bimmergroup Ελλάδα
Bimmergroup Κύπρος
ENET and K+DCAN cables for BMW —
compatible with BimmerCode, ISTA, INPA, E-Sys, BimmerLink and more.
Can’t find your model on the list? Contact us.
Selling Fast
Trending Now
Pick your cable
K+DCAN for E-series. ENET for F/G/U/I-series. Not sure? Use the selector above or see the comparison table below.
Have a 90s BMW with a round under-hood port?
Add the OBD1 (20-pin) → OBD2 adapter to reach early E-series modules.
USB-C-only laptop, tablet or phone?
For K+DCAN use USB-A → USB-C. For ENET use Ethernet → USB-C.
Install, connect, ignition ON, and run a first scan
ENET is driver-free. K+DCAN needs the FTDI VCP driver. Start with a full vehicle scan to verify communication.
| Spec | K+DCAN E-Series | ENET F/G/U/I-Series | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Compatible Software (Most Common) |
|
|
||||||||||||||||||||||||||||||||
| System Compatibility |
|
|
||||||||||||||||||||||||||||||||
| Compatible Vehicles |
|
|
That cable goes perfect for my E90. Everything functioning perfectly
Fast delivery, the K+DCAN cable works with my BMW E92, and support actually listens. Thanks.
Fast delivery, would happily order again
Fast delivery, everything went smoothly, item works perfectly—happily again!!!
Very good fast shipment good price
Works.
Delivered exactly as ordered. All top!!
Cable arrived, nothing was damaged, it works and it’s got a proper chip in the cable. 10/10
Well working product (both K-line and D-can) and short shipping. Satisfied with my purchase.
It's great, and the USB cable was delivered quite fast.
Great service
I honestly couldn’t believe how quickly my order was processed and sent out.
Really fast
The cable I ordered arrived quickly and does exactly what it’s meant to.
Quick reply. The K+DCAN OBD cable works great.
Top-notch service.
Very easy purchase, fast delivery. The cable works without any problems. Warm recommendations.
Effective, quick and easy.
Really good service and delivery was spot on.
No hassle at all. Ordered, sent, delivered.
Everything’s perfect!
Excellent service and best delivery
Brilliant service, super fast delivery and everything was spot on.
Brilliant
The cable works very good. I had a old obd2 cable that only worked for bmw to 2007. Now i can scan my E91 with no problems.
Good Product, and the Switch comes inhandy aswell.
Fast service
The ENET cable works exactly as it should. Recommended.
Excellent service :)
Yes. Add the OBD1 (20-pin) → OBD2 adapter and use it with K+DCAN.
For K+DCAN, add the USB-A → USB-C converter. For ENET, add the Ethernet → USB-C adapter.
ENET does not need drivers (it uses built-in Ethernet).
K+DCAN requires FTDI VCP driver.
If **Windows Update** is enabled, plug in the K+DCAN cable and Windows will automatically find and install the correct drivers.
If drivers are **not installed automatically**:
1. Download the latest **FTDI VCP driver** from the official FTDI website (ftdichip.com/drivers/vcp-drivers).
2. Unzip the downloaded package.
3. Right-click the **.inf** file and select Install.
4. After installation, reconnect the cable — it should now appear under **Device Manager → Ports (COM & LPT)** as USB Serial Port (COMx).
5. Note the COM port number for your diagnostic software settings.
Cables and adapters only. Setup guides and compatibility info are available on this page.
